DUPONT-MOLYKOTE-7400-ANTI-FRICTION-CO-5KG-PAIL
MOLYKOTE® 7400 Anti-Friction Coating
MOLYKOTE® 7400 Anti-Friction Coating is a water-based, air-cured coating free of flammable solvents, offering wide-temperature-range performance.
126 products
DUPONT-MOLYKOTE-106-ANTI-FRICTION-COA-1KG-BOTTLE
MOLYKOTE® 106 Anti Friction Coating
MOLYKOTE® 106 Anti-Friction Coating is a heat-cured anti-friction coating for permanent dry film lubrication, offering good adhesion and high load-carrying capacity.
DUPONT-MOLYKOTE-L-13-THINNER-5-L-CAN
MOLYKOTE® L-13 Thinner
MOLYKOTE® L-13 Thinner is a transparent, solvent-based thinner designed to dilute a MOLYKOTE® Anti-Friction Coating.
DUPONT-MOLYKOTE-D-321-R-ANTI-FRICTION-18-3KG-PAIL
MOLYKOTE® D-321 R Anti-Friction Coating
MOLYKOTE® D-321 R Anti-Friction Coating is an air-cured dry film lubricating surface coating with molybdenum disulfide and graphite for wear protection and stick-slip prevention.
DUPONT-MOLYKOTE-D-10-GBL-ANTI-FRICTIO-10EA-CAN
MOLYKOTE® D-10-GBL Anti-Friction Coating
MOLYKOTE® D-10-GBL is a heat-cured anti-friction coating for long-term wear protection and high-temperature resistance.
DUPONT-MOLYKOTE-3400A-ANTI-FRICTION-C-20KG-PAIL
MOLYKOTE® 3400A Anti-Friction Coating LF
MOLYKOTE® 3400A is a heat-cured anti-friction coating with molybdenum disulfide and antimony trioxide, offering superior lubrication, corrosion protection, and solvent resistance.
DUPONT-MOLYKOTE-3402-C-LF-ANTI-FRICTI-0-5KG-CAN
MOLYKOTE® 3402-C LF Anti-Friction Coating
MOLYKOTE® 3402-C LF is an air-cured anti-friction coating with molybdenum disulfide and antimony trioxide, offering excellent corrosion protection and wear resistance.
DUPONT-MOLYKOTE-7415-THINNER-5KG-PAIL
MOLYKOTE® 7415 Thinner
MOLYKOTE® 7415 Thinner is a low-evaporation-rate thinner for diluting and cleaning MOLYOTE® anti-friction coatings.
DUPONT-MOLYKOTE-D-7409-NEP-EC-ANTI-FR-0-5KG-CAN
MOLYKOTE® D-7409-NEP EC Anti-Friction Coating
MOLYKOTE® D-7409-NEP EC is a heat-cured anti-friction coating with molybdenum disulfide and graphite for high-load applications.
DUPONT-MOLYKOTE-D-321-R-SPRAY-1-X-400-ML-CAN
MOLYKOTE® D-321 R Spray
MOLYKOTE® D-321 R Spray is an aerosolized, air-cured anti-friction coating with molybdenum disulfide and graphite for enhanced stick-slip prevention.
DUPONT-MOLYKOTE-EM-D110-GREASE-16-KG-PAIL
MOLYKOTE® EM-D110 Grease
MOLYKOTE® EM-D110 Grease is a high-viscosity synthetic PAO grease designed to quiet and control motion in demanding automotive and equipment assemblies. Its lithium-thickened, PTFE-fortified formulation delivers excellent noise damping, making it ideal for plastic gears, driveshaft spline connections, and other interfaces where engagement feedback needs to be reduced. EM-D110 is compatible with most engineering plastics and elastomers, so you can lubricate mixed-material mechanisms without worrying about stress cracking or softening. Low seepage and long service life help keep enclosed components clean and stable over time, even under vibration and elevated temperature. If you are fighting gear whine, harsh engagement, or cleanliness issues inside plastic housings, EM-D110 gives you a purpose-built damping grease backed by DuPont’s MOLYKOTE® technology and ChemPoint’s application support.
DUPONT-MOLYKOTE-SK-623-GREASE-16-KG-PAIL
MOLYKOTE® SK-623 Grease
MOLYKOTE® SK-623 Grease is a white, low noise PAO grease designed for plastic and plastic/metal mechanisms that need quiet, smooth motion over a wide temperature range. It combines a polyalphaolefin base oil, lithium soap thickener, and finely dispersed white solid lubricants to reduce friction and damp vibration in sliding and rotating plastic parts. With a service temperature range from -40 °C to 150 °C, it supports reliable operation from cold start to continuous high temperature use. SK-623 is formulated for good compatibility with most plastics and elastomers, which helps protect housings, gears, and seals from stress cracking or swelling. Its low friction coefficient and noise reduction properties make it ideal for automotive interior components, water and gas valves, office equipment, and other applications where squeaks and rattles are not acceptable. If you are chasing down plastic squeaks, chatter, or feel issues, MOLYKOTE® SK-623 gives you a purpose built low noise plastic lubricant to review with a ChemPoint specialist.
DUPONT-MOLYKOTE-G-5042-SILICONE-AUTOM-180-KG-DRUM
MOLYKOTE® G-5042 Silicone Automotive Grease
MOLYKOTE® G-5042 Silicone Automotive Service Grease is a purple, NLGI 1 silicone grease designed for long-term lubrication of metal/plastic and plastic/plastic interfaces across a very wide temperature range. It uses a siloxane base oil and lithium soap thickener to deliver excellent low-temperature performance down to -50 °C while staying stable up to 170 °C. G-5042 is compatible with many plastics and elastomers, making it a safe choice around EPDM boots, cable liners, and engineering plastics where mineral or PAO greases can cause swelling or cracking. Its low friction in steel-against-plastic contacts makes it ideal for starter motor overrun clutches, control cables, and wiper motor gears that must stay smooth and quiet over the life of the vehicle. The distinctive purple color allows quick visual confirmation of coverage on the line or in service. For engineers who need a plastic-safe, wide-temperature silicone service grease they can standardize across multiple automotive mechanisms, MOLYKOTE® G-5042 is a strong candidate to review with a ChemPoint specialist.
DUPONT-MOLYKOTE-LONGTERM-2-78-GREASE-180-KG-DRUM
MOLYKOTE® Longterm 2/78 Grease
MOLYKOTE® Longterm 2/78 Grease is a high-performance mineral-oil-based grease for metal-to-metal components that see high loads, slow to moderately rapid movement, and harsh operating conditions. It combines a lithium or lithium/zinc soap thickener with molybdenum disulfide (MoS₂) solid lubricants plus oxidation and corrosion inhibitors to deliver long-term protection. Designed for tie-rod linkages, axle rod linkages, ball joints, plain bearings, guides, splined shafts, and small gear units, it keeps critical chassis and machine joints moving freely instead of seizing or wearing out early. With an NLGI 2 consistency, base oil viscosity around 105–106 mm²/s at 40 °C, and a service range of roughly −35 °C to 130 °C, Longterm 2/78 handles cold starts and elevated operating temperatures without losing film strength. High load-carrying capability, good water resistance, and strong corrosion protection make it ideal for exposed automotive and mobile equipment hardware. It contains no intentional PTFE or PFAS, aligning with evolving OEM and regulatory expectations. If you are fighting noisy or loose joints, frequent re-greasing, or rusted linkages, MOLYKOTE® Longterm 2/78 is a strong candidate to review with a ChemPoint specialist.
DUPONT-MOLYKOTE-AS-880N-GREASE-20-KG-PAIL
MOLYKOTE® AS-880N Grease
MOLYKOTE® AS-880N Grease is a silicone oil, silica-thickened, light-consistency grease engineered specifically for noise control in disc brake systems. It is designed to be applied between brake pads and shims, and between metal/metal or metal/plastic interfaces, to reduce and prevent brake squeal without compromising clamp force. With a wide service-temperature range from -40 °C to 204 °C (-40 °F to 400 °F), it keeps performing from winter cold-soak through repeated high-energy stops. The silicone base resists washout, evaporation, and oxidation, while the silica thickener and solid lubricants create a thin, tenacious film that stays where you put it. AS-880N is compatible with common brake metals, shims, and many plastics, making it a safe choice for mixed-material pad and shim designs. It contains no intentional PTFE or PFAS, aligning with evolving OEM and regulatory requirements. For brake engineers and service teams chasing persistent squeal at the pad/shim interface, MOLYKOTE® AS-880N offers a purpose-built, high-temperature silicone shim grease worth reviewing with a ChemPoint braking specialist.
DUPONT-MOLYKOTE-G-3407-CALIPER-PIN-GR-180-KG-DRUM
MOLYKOTE® G-3407 Caliper Pin Grease
MOLYKOTE® G-3407 Caliper Pin Grease is a synthetic PAG-based grease engineered specifically for floating brake caliper guide pins and other metal-to-metal brake hardware. It maintains low, consistent friction between the pin and bracket bore so the caliper can center freely instead of sticking, even under high braking temperatures and vibration. With a wide service-temperature range of -40 °C to 200 °C, G-3407 supports reliable performance from winter cold-soak to repeated high-energy stops. The lithium-complex thickener and anti-fretting package deliver excellent wear protection, corrosion resistance, and low bleed/evaporation at 150 °C, which helps keep lubricant where it belongs and off pads and rotors. Enhanced EPDM compatibility at 150 °C helps protect boots and sleeves from swelling or cracking, reducing contamination-driven failures. G-3407 is GM 9986340 approved and contains no intentional PTFE or PFAS, making it a strong choice for OEM platforms and service programs that need a severe-duty, regulatory-aligned caliper pin grease.
DUPONT-MOLYKOTE-G-407-ANTI-FRETTING-G-18-KG-PAIL
MOLYKOTE® G-407 Anti-Fretting Grease
MOLYKOTE® G-407 Anti-Fretting Grease is a PAG-based, green grease engineered specifically for floating brake caliper guide pins and other metal-to-metal joints that see constant micro-movement. It is formulated to minimize fretting corrosion, stick–slip, and noise in brake hardware while maintaining excellent compatibility with EPDM boots and other common elastomers. With a wide service temperature range from -40 °C to 150 °C, G-407 keeps caliper pins moving freely from cold starts on winter mornings through repeated high-temperature braking. Low bleed and evaporation mean the grease stays where you put it instead of migrating onto pads, rotors, or friction surfaces. At the same time, robust oxidation resistance and corrosion protection help extend component life in salt, moisture, and road-splash environments. If you are dealing with seized caliper pins, uneven pad wear, or boot compatibility concerns, MOLYKOTE® G-407 gives you a purpose-built anti-fretting solution worth reviewing with a ChemPoint braking specialist.
DUPONT-MOLYKOTE-D-3484-ANTI-FRICTION--5-KG-PAIL
MOLYKOTE® D-3484 Anti-Friction Coating
MOLYKOTE® D-3484 Anti-Friction Coating is a heat-curing, MoS₂/graphite dry-film lubricant for metal-to-metal contacts that see slow to moderately fast movement under moderate to very high loads. It forms a thin, gray-black solid lubrication layer that replaces oils and greases where contamination risk, re-lubrication access, or temperature make conventional lubricants a headache. With a service temperature range from -70 °C to +250 °C and Falex-tested high load-carrying capability, D-3484 keeps sliding surfaces protected from cold start through sustained high-temperature duty. It combines excellent lubricating effect with good corrosion protection, high abrasion resistance, and long service life, making it a strong fit for safety-critical and hard-to-reach components. D-3484 is used successfully on pawls of safety cutouts, carburetor springs, lorry coupling sleeves, toothed gears, and automotive safety-belt and trunk-lock parts, as well as bolts and levers in tractors and construction machinery. It contains no intentional PTFE or PFAS, helping align new designs with tightening OEM and regulatory expectations. If you need a high-load, wide-temperature dry film for threaded fasteners, gears, or linkages where grease is not an option, MOLYKOTE® D-3484 is a grade to review with a ChemPoint specialist.
DUPONT-MOLYKOTE-YM-102-GREASE-16-KG-PAIL
MOLYKOTE® YM-102 Grease
MOLYKOTE® YM-102 Grease is a synthetic, lithium-soap grease with solid lubricants designed for heavily loaded plastic gears, rails, slides, and actuators in automotive and electrical assemblies. It delivers high load-carrying capacity and a very low coefficient of friction, making it ideal for plastic-on-plastic and plastic-on-metal interfaces that can’t tolerate standard mineral greases. YM-102 offers a broad service temperature range from -50 °C to 150 °C, so interior mechanisms, actuators, and small drives keep moving smoothly from cold start through sustained operation. Low seepage, low evaporation, and good oxidation resistance help keep enclosed housings clean and extend relubrication intervals. The grease is compatible with most engineering plastics, so you can lubricate high-load plastic gears and guides without triggering stress cracking or swelling. For design engineers and maintenance teams dealing with worn plastic gears, rail chatter, or actuator failures, MOLYKOTE® YM-102 is a purpose-built plastic gear grease that’s worth reviewing with a ChemPoint specialist.
DUPONT-MOLYKOTE-7375-ADDITIVE-POWDER-25-KG-BAG
MOLYKOTE® 7375 Additive Powder
MOLYKOTE® 7375 Additive Powder is a friction control additive engineered for brake and clutch lining formulators who need stable, quiet, and durable braking performance. It is a free-flowing blend of inorganic solids designed to be incorporated directly into disc brake pads, drum brake linings, railroad brake pads, and clutch linings. By stabilizing friction, reducing fade, and cutting vibration, MOLYKOTE® 7375 helps you hit demanding NVH and stopping-distance targets without relying on legacy antimony or lead systems. The additive supports high temperature performance up to around 650 °C, allowing friction materials to maintain consistent behavior under repeated, high-energy braking. With no intentional PTFE or PFAS and compliance with End-of-Life Vehicles (ELV) requirements, it aligns with modern regulatory and OEM expectations. If you are tuning brake pad formulations for comfort, durability, and low noise, MOLYKOTE® 7375 gives you a proven, multi-purpose brake pad additive that is worth reviewing with a ChemPoint friction materials specialist.
DUPONT-MOLYKOTE-PA-744-ANTI-FRICTION--CASE-OF-CARTONS-4-X-1KG
MOLYKOTE® PA-744 Anti-Friction Coating
MOLYKOTE® PA-744 Anti-Friction Coating is a heat-cured dry-film lubricant designed for piston skirts and other highly loaded sliding metal surfaces in automotive and industrial equipment. It lays down a thin, bonded coating with graphite and molybdenum disulfide (MoS₂) solids in an organic resin system, providing reliable lubrication where conventional oils and greases struggle. On engine and compressor pistons, PA-744 helps cut scuffing during cold starts and run-in, when boundary lubrication is most severe. Its wide operating range from roughly −75 °C to 300 °C supports both low-temperature cranking and high-temperature ring and skirt zones without losing film integrity. Because it cures to a clean, dry coating, PA-744 is ideal wherever you need long-term lubrication without oil migration, dripping, or contamination. If you are trying to extend piston life, reduce engine or compressor noise, or protect metal surfaces under extreme loads, this anti-friction coating is a strong candidate to review with a ChemPoint specialist.
DUPONT-MOLYKOTE-G-804-COMPOUND-18KG-PAIL
MOLYKOTE® G-804 COMPOUND
Silicone based compound with silica thickener offering low volatility and commonly used in spark plug boots, O-rings & seals.
DUPONT-MOLYKOTE-3179-DILATANT-COMPOUN-22-6KG-BOX
MOLYKOTE® 3179 Dilatant Compound
MOLYKOTE® 3179 Dilatant Compound is an NLGI Grade 6 silicone polymer–based compound with a silica thickener offering high elasticity and bounce commonly used in novelty toys.
DUPONT-MOLYKOTE-3099-HVIC-COMPOUND-22-6KG-PAIL
MOLYKOTE® 3099 HVIC Compound
MOLYKOTE® 3099 HVIC Compound is an NLGI Grade 2–3 silicone-based lubricant with a silica thickener and an arc-resistant filler for long-term protection of electrical insulators.